Temperature Sensor with DF11 I/O Connectors

  • 695


This module contains a TMP102 Temperature Sensor. The TMP102 is accurate to 0.5°C/0.9°F over a range of -25°C to +85°C (-13°F to 185°F). Some of the other components on the board may not be able to handle that wide of range. Other components, especially microcontrollers, produce heat and can change the temperature at the TMP102 by several degrees if they are too close thermally to it.


  • TMP102 Temperature Sensor
    • 12-bit Resolution
    • Readings to 0.0625°C resolution
    • Very low power
    • -40°C to +125°C Temperature Range
    • Programmable Alert Output
  • +3.6V to +6V Input Voltage
  • Power management designed for very low standby power
  • Small Size: PCB is 20mm x 20mm (0.79" x 0.79")
  • Connector Options:
    • 10 Pin DF11 Male Connector to allow installation on an Engimusing Processor with DF11-10 I/O
    • 4 Pin DF11 Right Angle Male Connector for cable connection


  • Thermostat Controls
  • Battery Management
  • Thermal Protection circuits
  • Environmental Monitoring
  • Home automation


TMP102_DF11_B Schematic
TMP102_DF11_B Eagle Files
TMP102 Data Sheet

Arduino IDE Examples:






We Also Recommend